The automatic production line of 3 Dimensional, adopt PLC control system with touch screen, by pneumatic and stepping motor power, via auto oblique joint and cut off, the strict fixing of flat mesh and foam panel, the combined welding of oblique cutting wire and flat mesh, to finish the produce of iron wire mesh frame polystyrene sandwich panel. It has following character: automation production, high productivity, loss welding rate, large strength of welding point, welding uniformity, good surface, and the production cost is very low.
The main parameter:
Rated power |
75KVA |
input power source |
AC380V 50HZ |
Configuration of gas source |
3m3/min 0.6Mpa |
Application range |
thickness of core plate |
5mm - 100mm |
Structure of Joint Wire |
Single, double side mesh; spare, dense wire joint |
Manufacturing scale |
Standard |
Length |
3000mm |
Width |
1220mm |
Non-standard |
Length range ≤4500mm |
material |
Iron Wire Diameter available |
Cold drawing low carbon steel wire Ø2-Ø2.5mm |
Material of core plate |
flame-resisting polystyrene foam plate |
Material of filament Plate |
Plate mesh in aperture 50mm x 52mm |
Loss welding rate |
≤5% |
Strength of welding |
Per dot ≥330N |
Measurement of the machine |
Length |
13500mm |
Width |
1800mm |
Height |
1700mm |
Weight |
4000kg |
Output speed :
Based on a 300 working days per year, each with 8 hours and assumed efficiency factor of 60 % (depending on local conditions), this results in a max. net output of pprox.300.000 m2 per year and per one working shift on a thuss step of 200 mm and in a max. net output of approx. 220.000 m2 per year and per one working shift on a truss step of 100 mm. Hard drawn wire for cover mesh and for splice mesh:3 mm diameter, minimum yield strengsth of 500 to 550 N/mm2, maximum carbon contend 0.15 %, clean wiresurface, no rust, rease, oil, paint or drawing compounds to insure smooth flow of the welding current. Galvanized wire for spacer (truss) wires:3.8 mm diameter, minimum yield strenth of 700 N/mm2, maximum carbon content 0.15 %, clean wire surface and uniform zinc coating. |
