EPS Block Molding Machine Air Cooling EPS Panel Foaming Machine

EPS block molding machine air cooling EPS panel foaming machine is a kind of new type industrial equipment. It has the features of high speed, stable production, low noise and low energy consumption. It is widely used in the industry to produce EPS blocks, panels, and other molded parts.

Technical Date

Item  LWB-2000A LWB-3000A LWB-4000A LWB-6000A
Mould Cavity Size(mm) 2040*1020*530 3060*1240*630 4080*1240*630 6080*1240*630
Block Size(mm) 2000*1000*500 3000*1200*600 4000*1200*600 6000*1200*600
Steam Entry DN80 DN80 DN100 DN150
Consumption 18~25kg/cycle 25~35 kg/cycle 40~50 kg/cycle 55~65 kg/cycle
Pressure 0.6~0.8Mpa 0.6~0.8 Mpa 0.6~0.8 Mpa 0.6~0.8 Mpa
CompressedAir Entry DN40 DN40 DN50 DN50
Consumption 1~1.2m3/cycle 1.2~1.6 m3/cycle 1.6~2 m3/cycle 2~2.2 m3/cycle
Pressure 0.6~0.8 Mpa 0.6~0.8 Mpa 0.6~0.8 Mpa 0.6~0.8 Mpa
 Drainage Diameter DN100 DN150 DN150 DN150
 Capacity @15kg/m³ 4min/cycle 5min/cycle 6min/cycle 8min/cycle
 Connected Load/Power 10KW 10KW 13KW 13KW
Overall Dimension (mm) 3800*2000*2100 5100*2300*2100 6100*2300*2200 8200*2500*3100
Weight 3800kg 5000kg 6500kg 9000kg
We make machines according to customers requirement

02

Features

Air Cooling Block Molding Machine

1. This machine applies PLC controller and touch screen control system to finish the autocycle process of opening-closing mould, feeding, heating, heat preservation, cooling, demoulding and releasing.

2.This machine is welded by high quality square profile steel and steel plate, which is subjected to heat treatment,to ensure the machine  has no deformation,and has high durability after being assembled.

3.This machine applies unique and advanced EPS heat penetration process,which make high quality plates whose six faces and interior are the same perfect.It also reaches remarkable energy saving effect.

4.Reasonable cooling pipeline system, fast cooling makes high productivity. Only 3-4min needed to produce a light plate.

5.Most of the main components are of world-famous brand,with reliable performance,stable quality,long service life and low maintenance cost.

6.This machine applies hydraulic pressure transmission, hydraulic ingot stripping,it makes steady running and tight locking.

7.This machine applies two charging ways,automatic pneumatic feeding or fan suction device feeding.Air cooling is at a low cost,energy saving.

8.Electric Appliance Control System and Computer Control System are optional.

9.Inside mold plates are 5mm thickness aluminum sheet coated with Teflon, we will charge extra cost if you need stainless steel sheet.

10.Foam pressure sensor is optional.

China Air Cooling Block Molding Machine

China Air Cooling Block Molding Machine is supplied by Block Molding Machine manufacturers, producers, suppliers on Global Sources. Machine introduction EPS block forming machine is used to make EPS blocks, and then cut into sheets for house insulation or packaging. Made from popular products.

03

Application

Leave a Reply

Your email address will not be published.